VERNIS MOTORS designs and manufactures brushless motors to be powered by both for dc / ac and dc / dc converters. These motors can be supplied with or without the control electronics.

In addition to industrial applications, ventilation, brushless motors are ideal for traction and mobility applications (such as bicycles, motorcycles, cars), since they offer great power with a very low weight, in addition to being able to offer maximum torques much higher, compared to classic induction motors, they can be equipped both with and without fan depending on their destination or final field of application. The constructive format is similar to that of IEC motors types 63, 90 and 112, these motors can be made with extruded casing and the electronics included inside for types 63, 80 and 90.

VERNIS MOTORS has developed an electric motor for light vehicles with a nominal torque of 32 Nm, maximum torque of 100 Nm, a nominal power of 11 kW, a voltage of 48 V dc, a nominal consumption of 200 A and an efficiency of 93% .

This motor stands out for its high performance at the work point, which makes it ideal for taking advantage of the energy supplied by the batteries, thus minimizing their weight and optimizing the space-autonomy binomial. It can also be adapted to the necessary interfaces in terms of power transmission and frame anchorage.

VERNIS MOTORS offers the kit composed of the motor equipped with its corresponding Hall sensors and the associated control electronics, which includes the appropriate electrical and temperature protections to constitute a safe, reliable and robust system.

The 4 and 8-pole brushless, sensorless or PMSM motors with permanent magnet rotor manufactured by VERNIS MOTORS guarantee high power with low weight, the reluctance torque (cogging) is minimal, ideal for traction motors with high peak torques throughout the entire speed range.


Motor PMSM T.90/8 8kW 4500rpm with reducer

Motor PMSM T.90/8 1.5kW 4500 rpm B5 with brake

Motor PMSM T.112/8 15kW 3750 rpm with forced ventilation

Motor PMSM T.112 / 8 15 kW 3750 rpm with forced and reducing ventilation for forced and reducing ventilation

Motor PMSM T.90/8 8kW 4500rpm

Motor T.56/4 500W 30Nm 200 rpm Includes epicyclic reducer

High efficiency brushless motor with permanent magnets mounted in extruded housing with flange mounting B14

High efficiency brushless motor with permanent magnets and IEC standard B5 flange fixing, controlled by built-in electronics.


Electric car

Electric Taxi

Post car

Golf Cars

Electric Pallet trucks


High efficiency 4-pole brushless / sensorless / PMSM motor

Motor brushless / sensorless / PMSM de alta eficiencia, 4 polos(ENG)

8-pole high-efficiency brushless / sensorless / PMSM motor

8-pole high-efficiency brushless / sensorless / PMSM motor




Vernis Motors designs and manufactures electric motors, direct current with permanent magnets, customized for the client or with standard couplings.In collaboration with our clients, the engineering department, we define the parameters and characteristics of direct current motors according to the needs that mark us the customer or electric application.

The motor casings are made of iron with anticorrosive treatment, for types CC-80 and CC-110 there is the possibility of equipping them with aluminum casing and self-ventilating. All motors are dynamically balanced. The supply voltages from 12 V to 200 V, the useful power up to 640 W, The nominal torque up to 1.7 Nm maximum and the speed up to 4800 rpm. The degree of protection is IP 54 and thermal insulation class F-155º.

APPLICATIONS: Our electric motors are used in multiple sectors; Nautical, Robotics, Solar Trackers, Vending Machines, Automotive Sector Lifts Railway Applications, etc …



Motor 4 poles, refrigerated IC 01, IP23

Motor 2 poles, refrigerated IC 01, IP23





 DC power plates:

 AC power plates:

Besides electric motors Vernis Motors also supplies converters and electronic drives to control electric motors, whether asynchronous motors or brushless motors.Within the range brushless motors, there are two possibilities, motors with Hall sensors, which allow the motor to start when a low starting torque is required, or sensorless motors that do not require this type of boot.

Plates for direct current supply: For supply voltages of 12 and 24 Vdc with maximum motor amperage of 17, 34 and 67 A, that is to say 1600 W max. Standard speeds are 1500 or 3000 r.p.m. although there is the possibility of programming other speeds.

Boards for alternating current power supply: Asynchronous and brushless motor control for 230 V supply voltages and powers of 1.1 KW and 2.2 KW. These boards have a 0-10 V analog input, a digital input and the option with an auxiliary control circuit, as well as an input to read the motor temperature. Variable frequency drives automatically adjustable to voltages of 110 V or 230 V and that allow the control of asynchronous motors up to 15000 r.p.m. Converters for single-phase 230 V 50/60 Hz input and three-phase 230 V 200 Hz output, with powers up to 1.8 KVA. The plates have relevant protections to guarantee the correct operation and protection of the equipment. The design of these plates is made in order to comply with current directives and regulations.

VERNIS MOTORS has controllers for 230V 50 / 60Hz alternating current supply, as well as for 12 and 24V direct current supply for controlling synchronous and asynchronous motors and powers up to 2.2kW. The plates for alternating current supply have a 0-10V analog input and a communication option through an auxiliary circuit, as well as an input for reading the motor temperature, allowing total control over the motor. All of them are designed with over-current, short-circuit and over-voltage protection to guarantee the correct operation and protection of the equipment. Consult with our sales representatives for electronic controlled motors.