ELECTRIC GENERATORS

ELECTRIC GENERATORS

ELECTRIC GENERATORS

The rotary generators or converters use the mains electricity to move a motor that in turn acts on another that works as a generator. This generator allows to obtain voltages and frequencies different from the input, with the most common being an output voltage of 42 V and a frequency of 200 Hz. These converters are intended for the feeding of vibrating needles for compacting concrete
Depending on the power they can supply, they incorporate a series of power sockets to be able to connect one or more vibrating needles. They can be connected to single-phase or three-phase networks and with input frequencies of 50 or 60 Hz. de 50 o 60 Hz.

CARACTERÍSTIQUES TÈCNIQUES  P

Tensió d’Entrada 230 V, 230/380V
Frequència d’entrada: 50-60 Hz
Tensió de sortida: 42 V
Frequència de sortida: 200 Hz a 180 Hz
Potencia: 1 KVA a 6 KVA
Consum: 4.5 a 13 A
Protecció elèctrica: SI
Grau de protecció:  IP 55
IEC MOTORS

IEC MOTORS

IEC MOTORS

Vernis Motors designs and manufactures single phase and three phase electric motors according to IEC standars wich sets the dimensions of shafts and anchorages for the mentioned motors.

Single Phase with rotor in short circuit

Standard Voltage: 230V

 

 

   

Three Phase with rotor in short circuit

Standard Three Phase Voltage: 230/380V. Connection D/Y.

 

 

 

UNIVERSAL MOTORS

UNIVERSAL MOTORS

UNIVERSAL MOTORS

CARACTERÍSTICAS PRINCIPALES

 

Tensión nominal: 115 Y 230 V
Frecuencia: 50-60 Hz
Potencias disponibles: Hasta 1800 W
Velocidad: De 3000 a 13300 r.p.m.
Diámetro exterior estator: 90-110
Diámetro exterior inducido: 50
Eje:  Acero
Rotor  Bobinado

We have a range of universal motors for countless applications.As in all universal motor, the stator windings are in series with the armature through the collector.Typical applications of this type of motor are: machine tools, industrial cleaning equipment, centrifuges and other laboratory equipment.These motors meet the CE standars and are in accordance with the Low Voltage Regulation.

SPECIAL MOTORS

SPECIAL MOTORS

SPECIAL MOTORS

In VERNIS MOTORS, SL We have a range of universal motors for countless applications.

   

 

The motor AC018003 is a vibrating motor designed by Vernis Motors for use in vibrating screeds.Its innovative design, compact and robust, allows its installation in small spaces and with maximum guarantees.The vibration level is easily adjustable by removing the protective caps and repositioning in the opposite direction the eccentric weights.It is supplied with, cables, connection box, start-stop switch and capacitor.

TECHNICAL CHARACTERISTICS:

Voltage:  V  230 II
Intensity: 0,7 A
Frequency: 50 Hz
Power: 100 W
Weight: 4,5 Kg
IP Protection Code: IP-65
Insulation Class: 155ª
Max Centrifuge Force: 86 Kg/Nota

Other configurations are possible on request.

  • Three Phase network.
  • Different Voltages.
  • Custom colours.

ELECTRONICS CONVERTERS

ELECTRONICS CONVERTERS

ELECTRONICS CONVERTERS

Besides electric motors Vernis Motors also supplies converters and electronic drives to control electric motors, whether asynchronous motors or brushless motors.Within the range brushless motors, there are two possibilities, motors with Hall sensors, which allow the motor to start when a low starting torque is required, or sensorless motors that do not require this type of boot.

 

Electronic circuits for DC power supply:
For supply voltages of 12 and 24 Vdc with maximum motor amperage of 17, 34 and 67 A, or to say 1600W. Standard speeds are 1500 or 3000 rpm although there is the possibility to program other speeds.

Electronic circuits for AC supply:
Control of induction motors and brushless motors for supply voltages of 230 V and power of 1.1 kW and 2.2 kW. These circuits are equipped with a 0-10V analog input, a digital input and a communication option with an auxiliary control circuit, plus an entry to read the motor temperature.

Frequency drives automatically adjustable for voltages of 110 V or 230 V which allows control of asynchronous motors up to 15000 rpm
Converters for single-phase Input 230V 50/60 Hz and three-phase output 230 V 200 Hz, with powers up to 1.8 KVA.
The circuits have over current, short circuit and high voltage protection to ensure proper operation and equipment protection.
The design of the circuits is made to satisfy with the directives and applicable standards:

Adjustable frequency drives automatically voltages of 110 V or 230 V and allow control of asynchronous motors up to 15000 rpm Converters Input 230V 50/60 Hz.

Single and output to 230 V three-phase 200 Hz, with powers up to 1.8 KVA.

The plates have overcurrent protection, short circuit, overvoltage to ensure proper operation and equipment protection.

The design of the plates is made to comply with the directives and applicable regulations:
UNE-EN 55014-1: 2008 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 1: Emission.

UNE-EN 55014-2: 1998 / A2: 2009 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2: Immunity.

UNE-EN 61000-6-1: 2007 Electromagnetic compatibility (EMC). Part 6-1: Generic standards. Immunity for residential, commercial and light industrial environments.

UNE-EN 61000-6-3: 2007 / A1: 2012 Electromagnetic compatibility (EMC). Part 6-3: Generic standards. Emission standard for residential, commercial and light industrial environments.

EN 61800-2: 1998 Adjustable speed electrical power drive systems – Part 2: General requirements – Rating specifications for low voltage adjustable frequency ac power drive systems.

EN 61800-3: 2004 Adjustable speed electrical power drive systems – Part 3: EMC Requirements and specific test methods.