IEC MOTORS

IEC MOTORS

by | Aug 25, 2016

SINGLE PHASE IEC MOTORS

THREE PHASE MOTORS

VERNIS MOTORS  designs and manufactures a wide variety of single phase electric motors from parell d’arrencada mitjà. The IE1 single phase electric motors are assembled on B3, B5 and B14 type flanges and have a rear cover to avoid the entry of foreign particles, water, oli or pols into the interior of the motor.

The protection rating is IP-55 and the rating is F-EFF2 class. Aquests motors elèctrics monophasics come completely tancats and compete with outdoor ventilation. The treball voltage is 230V.

Motor IEC with flange B5

Motor IEC with flange B3

CONSTRUCTIVES FORMS
MOUNTING DIMENSIONS

TABLE OF MODELS

Electric Motors IE 1

IE1 Single Phase 2 poles / 50 Hz. 230V
IE1 single phase 4 poles / 50 Hz. 230V
IE1 single phase 6 poles / 50Hz. 230V

IE1 monofasicos 6 polos / 50Hz. 230V( Duplicate )

IE1 single phase 8 poles / 50Hz. 230V

Electric Motors IE 2

IE2 single phase 2 poles / 50Hz. 230V
IE2 single phase 4 poles / 50 Hz. 230V
IE2 single-phase 6 poles / 50 Hz. 230V
IE2 single-phase 8 poles / 50 Hz. 230V

Electric Motors IE3

IE3 single-phase 2 poles / 50 Hz. 230V

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

IE3 single-phase 4 poles / 50 Hz. 230V

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

IE3 single-phase 6 poles / 50 Hz. 230V

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

IE3 single-phase 8 poles / 50 Hz. 230V

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

DC MOTORS

DC MOTORS

by | Feb 21, 2016

DC MOTORS

Vernis Motors designs and manufactures electric motors, direct current with permanent magnets, customized for the client or with standard couplings.In collaboration with our clients, the engineering department, we define the parameters and characteristics of direct current motors according to the needs that mark us the customer or electric application.

The motor casings are made of iron with anticorrosive treatment, for types CC-80 and CC-110 there is the possibility of equipping them with aluminum casing and self-ventilating. All motors are dynamically balanced. The supply voltages from 12 V to 200 V, the useful power up to 640 W, The nominal torque up to 1.7 Nm maximum and the speed up to 4800 rpm. The degree of protection is IP 54 and thermal insulation class F-155º.

APPLICATIONS: Our electric motors are used in multiple sectors; Nautical, Robotics, Solar Trackers, Vending Machines, Automotive Sector Lifts Railway Applications, etc …

CONSTRUCTIVES FORMS

TECHNICAL CHARACTERISTICS

TABLE OF MODELS:

Motor 4 poles, refrigerated IC 01, IP23

Motor 2 poles, refrigerated IC 01, IP23

MOUNTING DIMENSIONS DC MOTORS.  Other Powers consult 

ELECTRONICS CONVERTERS

ELECTRONICS CONVERTERS

by | Feb 21, 2016

ELECTRONICS CONVERTERS

 DC power plates:

 AC power plates:

Besides electric motors Vernis Motors also supplies converters and electronic drives to control electric motors, whether asynchronous motors or brushless motors.Within the range brushless motors, there are two possibilities, motors with Hall sensors, which allow the motor to start when a low starting torque is required, or sensorless motors that do not require this type of boot.

Plates for direct current supply: For supply voltages of 12 and 24 Vdc with maximum motor amperage of 17, 34 and 67 A, that is to say 1600 W max. Standard speeds are 1500 or 3000 r.p.m. although there is the possibility of programming other speeds.

Boards for alternating current power supply: Asynchronous and brushless motor control for 230 V supply voltages and powers of 1.1 KW and 2.2 KW. These boards have a 0-10 V analog input, a digital input and the option with an auxiliary control circuit, as well as an input to read the motor temperature. Variable frequency drives automatically adjustable to voltages of 110 V or 230 V and that allow the control of asynchronous motors up to 15000 r.p.m. Converters for single-phase 230 V 50/60 Hz input and three-phase 230 V 200 Hz output, with powers up to 1.8 KVA. The plates have relevant protections to guarantee the correct operation and protection of the equipment. The design of these plates is made in order to comply with current directives and regulations.

VERNIS MOTORS has controllers for 230V 50 / 60Hz alternating current supply, as well as for 12 and 24V direct current supply for controlling synchronous and asynchronous motors and powers up to 2.2kW. The plates for alternating current supply have a 0-10V analog input and a communication option through an auxiliary circuit, as well as an input for reading the motor temperature, allowing total control over the motor. All of them are designed with over-current, short-circuit and over-voltage protection to guarantee the correct operation and protection of the equipment. Consult with our sales representatives for electronic controlled motors.