Ozone Generator

Portable ozone generator and direct discharge, specially designed for carrying out purification and disinfection of environments.

VERNIS models generate ozone through a system of electric discharges, which are obtained by applying a high-voltage alternating current between two electrodes where a dielectic is located.

Thanks to the combination of its robust and light design, its simple handling and the variety in the power range, this machine adapts to both domestic, professional, and industrial Division use.

Model G0-20

Portable ozone generator for air treatment of 20 grams per hour.

Robust and lightweight design

Stainless steel housing. The use of high-tech elements allows the generation of significant amounts of ozone in a reduced size and weight. Anti-vibration handle and feet make it easy to transport and place the machine on multiple surfaces.

Simple operation

A simple switch (ON / OFF) activates or deactivates the equipment. The countdown timer up to 45 minutes starts the ozone generator. The LED light indicates whether the machine is performing disinfection.

Safety Measures

Machine equipped with grounding. A protection fuse protects against possible breakdowns.


Timer: 1-30 Minutes
Ozone output: direct discharge
Air flow: 2 s 120 m3
Power: 320W
Voltage: 230V
Frequency: 50 Hz
Dimensions: 255x235x300 mm
Weight: 6’5 Kg

Download the Catalogue (ES)





Public Transport

Funeral Homes


Shoping Centers




VERNIS MOTORS has an extensive range of geared motors for many applications among which are: vending, fluid transfer, laboratory equipment, electrical appliances, automatic doors, etc.. The power of these units can be both AC and DC, there are endless possibilities for the output speed of the gearbox and torque required.

Combined crown-worm gear motors: According to the indications of our clients, at VERNIS MOTORS we carry out special assemblies such as combined crown-worm gear motors that consist of two speed reducers that are coupled to achieve greater and higher speed reductions. It is a very simple and inexpensive solution, but in this type of assembly a decrease in performance must be anticipated.

Worm gearmotors and standard execution: Both in the standard worm gearmotors and in the combined version, the assembly is carried out with motors of special manufacture requested by the customer or according to the IEC standard. Assemblies made in VERNIS MOTORS are delivered with a B14 or B5 flange. (Consult other flanges)

DC geared motor with tachometric dynamo: Due to the great demand in the market, VERNIS MOTORS has developed motors with speed regulated by tachometric dynamo. Also, and at the request of our clients, we develop applications with hall or encoders.

Motor reductor RM-Motor CC

Accionat per motor de CC; Parell màxim del reductor: 80Ncm.



RM900 -motor CC 
Potència : 3,3W
Freqüència: 50Hz
Velocitat: 6.800 rpm

RM900 – motor CC
Potència: 6,6W
Freqüència: 50Hz
Velocitat: 7.000 rpm

Nota: En aplicacions amb reduccions elevades, haurà de reduir les prestacions de sortida un 10% a causa de la disminució del rendiment del propi reductor

Motor reductor RC-Motor AC

Accionat per motor d’AC; Parell màxim del reductor: 300Ncm



RC 920 -motor AC
Potència :9W
Velocitat: 2.750 rpm


RC 940 -motor AC
Potència :15W
Velocitat: 2.800 rpm

RC 960 -motor AC
Potència :15W
Velocitat: 2.800 rpm


Motor reductor RD-Motor AC

Accionat per motor de C.A; Parell màxim del reductor: 150Ncm.


RD915 – motor AC
Potència: 7W
Freqüència: 50Hz
Velocitat: 2. 700 rpm


RD920 – motor AC
Potència: 9W
Freqüència: 50Hz
Velocitat: 2. 750 rpm





 DC power plates:

 AC power plates:

Besides electric motors Vernis Motors also supplies converters and electronic drives to control electric motors, whether asynchronous motors or brushless motors.Within the range brushless motors, there are two possibilities, motors with Hall sensors, which allow the motor to start when a low starting torque is required, or sensorless motors that do not require this type of boot.

Plates for direct current supply: For supply voltages of 12 and 24 Vdc with maximum motor amperage of 17, 34 and 67 A, that is to say 1600 W max. Standard speeds are 1500 or 3000 r.p.m. although there is the possibility of programming other speeds.

Boards for alternating current power supply: Asynchronous and brushless motor control for 230 V supply voltages and powers of 1.1 KW and 2.2 KW. These boards have a 0-10 V analog input, a digital input and the option with an auxiliary control circuit, as well as an input to read the motor temperature. Variable frequency drives automatically adjustable to voltages of 110 V or 230 V and that allow the control of asynchronous motors up to 15000 r.p.m. Converters for single-phase 230 V 50/60 Hz input and three-phase 230 V 200 Hz output, with powers up to 1.8 KVA. The plates have relevant protections to guarantee the correct operation and protection of the equipment. The design of these plates is made in order to comply with current directives and regulations.

VERNIS MOTORS has controllers for 230V 50 / 60Hz alternating current supply, as well as for 12 and 24V direct current supply for controlling synchronous and asynchronous motors and powers up to 2.2kW. The plates for alternating current supply have a 0-10V analog input and a communication option through an auxiliary circuit, as well as an input for reading the motor temperature, allowing total control over the motor. All of them are designed with over-current, short-circuit and over-voltage protection to guarantee the correct operation and protection of the equipment. Consult with our sales representatives for electronic controlled motors.